CREACIONES MARSANZ S.A. is a leading Spanish company with 50 years dedicated to the development and manufacture of commercial equipment. Among the product range, their most popular products are shopping trolleys, transport trolleys, shelving systems, entry-exit devices, and a wide range of check-outs.
Marsanz started in 1966 and so have had five decades of continuing development and ongoing work thanks to their multidisciplinary team of professionals. This has lead Marsanz to today being a leading company in its sector, with an international presence across 5 continents.
Creaciones Marsanz has 4 independent factories, each of them specialized in different products, with an overall surface of more than 50.000 m2.
Marsanz Technical Specification:
Creaciones Marsanz s.a. manufacture a full range of trolleys with a ridged wire basket attached to a wheeled chassis with a handle and bag hook. Optional extras include baby seats, rear baskets and platforms. Capacity ranges from 50 to 240 litres in the Marsanz standard line.
Finishing: Made with high quality raw materials ¦ accordance with European Standards UNE EN 10016 / UNE EN 10303. The Steel wire thickness used is from 3 to 14mm in diameter and all joints have weld penetrations averaging 15% but dependent on the thickness of wire used.
Coating: Zinc coated: electrolytic zinc treatment applied in a layer from 10 to 20 microns thick.
Covering: Electrostatically coated with 60 to 80 microns of clear polyester polymerised at 200°C
Chemical Resistance:
Salt Spray: (ASTM B 117) > 700 Hours
Moisture Test Chamber: (DIN 50017) > 1000 Hours
Distilled Water Immersion: (40°C) > 700 Hours
Mechanical Properties:Steel tubes are protected with 50 to 60 microns of microcrystalline phosphate coating (BONDER 132) and polymerised at 200°C were used to carry out the chemical and mechanical tests.
Brightness: 60 (DIN 50017) 100%
Adherence: (2mm Grid Square) 100%
Hardness: (Pencil-Proof INTA 160302-2) >3Hours
Notch Strength: (ASTM D 2974) BALL 12mm
Direct: 70cm
Inverse: 70cm
Persoz Hardness > 300
Cone Mandrel Flexibility: (Din 53156) 5mm
Comfort and Ergonomic Properties:All trolleys are manufactured in accordance with all comfort and ergonomic requirements within the following standards: UNE EN 1929-1 / prEN 1929-2 / prEN 1929-3 / prEN 1929-4 / prEN 1929-7
Standard Round Handle:Our stock range uses the standard round handle however ERGObox & ERGOgrip handles are available but will be manufactured to order.
Galvanized high quality steel tube including lateral inserts to stop the handle rotating. Personalized screen print available on the handle with a polycarbonate sleeve covering the handle for protection from UV radiation. High strength side mouldings are made from PVC with lateral ribbing to engage the handle and fitted with screws creating the joint between the handle and trolley.
Wheels and Castors:
Swivel Castor: Housing made from zinc-chromatised pressed steel, double ball bearing swivel head and wheel axel with nut.
Wheel: Made from polypropylene, grey non-marking, tread made from thermoplastic rubber, thread guards and roller bearing, single bolt hole.
Our standard trolleys use 75, 100 and 125mm sized wheels.
Wheel Diameter
|
75mm
|
100mm
|
125mm
|
Width of Tread
|
25mm
|
32mm
|
32mm
|
Centre Hole
|
10.3mm
|
11mm
|
13mm
|
Offset
|
30mm
|
35mm
|
38mm
|
Swept Radius
|
135mm
|
170mm
|
201mm
|
Overall height
|
100mm
|
129mm
|
155mm
|
Dynamic Load Capacity
|
75kg/daN
|
80 kg/daN
|
100 kg/daN
|
Static Load Capacity
|
150kg/daN
|
160 kg/daN
|
200 kg/daN
|
Temperature
|
-20 to 60°C
|
-20 to 60°C
|
-20 to 60°C
|
Norm
|
EN 12530
|
EN 12530
|
EN 12530
|
Weight
|
0.301kg/daN
|
0.534kg/daN
|
0.661kg/daN
|
Stock colours of handles, ears and seats available on full range of Marsanz trolleys held in our UK warehouse:
Blue: RAL 5005
Green: RAL6028
Red: RAL3020
Black
Other colours of ears and seats available on a per order non-stock basis
Dark Red: RAL 3011
Light Orange: RAL 1028
Light Grey: RAL 7001
Dark Orange: RAL 2004
Yellow: RAL 1023
Light Green: RAL 6018
Handle branding available on request.